Delaware Concealed Carry Forum

General Gun Discussion => Gunsmiths Corner => Topic started by: warringt on December 31, 2010, 03:05:04 PM

Title: Help with a 1911 style parts gun
Post by: warringt on December 31, 2010, 03:05:04 PM

Hi,
    I have a 1911 type gun that is made up of parts from various manufacturers. Who can I get to look at it and see if it can be "tightened up" as it accuracy is poor.

Mark

Title: Re: Help with a 1911 style parts gun
Post by: Sigarms12 on December 31, 2010, 09:26:47 PM

As far as locally I'm not sure but google "1911 gun smiths" and you will find some very good and expensive smiths who can help you. It will all depend on what parts you have used and what the gun means to you. It can get very expensive when it comes to 1911's or try the 1911 Forum.

Title: Re: Help with a 1911 style parts gun
Post by: firststatefirearms on January 05, 2011, 04:13:40 AM

Paul Lamanna is a gunsmith.  He is very good.  He is located off of Capital Trail and Possum Park Road.