Delaware Concealed Carry Forum
January 23, 2018, 01:11:15 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News:
 
   Home   Help Search Login Register  
Pages: [1]
  Print  
Author Topic: Hand grip from plastic to rubber.  (Read 4038 times)
Willie848
Member
***
Posts: 75



« on: June 24, 2012, 02:44:58 PM »

Hey guy's just want know if anyone have any info. on how to replace the plastic hand grip on a Smith & Wesson 908. No screws afraid to force and pry them off anyone ever replaced hand grips on the 908 semi auto pistol.   
Logged
Adrenolin
Life Member
*****
Posts: 1481


« Reply #1 on: July 02, 2012, 08:03:10 PM »

It can be a pita as they are on quite tight. First you need to remove the pin on the lower rear corner of the grip. Using a punch you should be able to push it through and out by hand however a few taps from a mallet may be required to start it. Once the pin is removed the grip itself slides off rearward but again its on very tightly so a bit of persuading may be needed to assist it. Hope this helps.
Logged
Willie848
Member
***
Posts: 75



« Reply #2 on: July 05, 2012, 08:59:41 AM »

Thanks got the new pistol grips about a week ago. They were very very easy to install and they look and fill great,thanks for your help.
Logged
Adrenolin
Life Member
*****
Posts: 1481


« Reply #3 on: July 05, 2012, 09:33:04 AM »

Gladly. Happy it helped.  Smiley
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.19 | SMF © 2013, Simple Machines Valid XHTML 1.0! Valid CSS!